Step 11: Secure Rear Cross Brace
Bolt Rear Cross Brace(#12) to Bottom
Panels(#1) using 6 (#21) Bolts, 6 (#23) Washers,
and 6 (#24) Nuts.
See Figure 11 for bolt locations.
Hardware Needed for Step 11:
6 (#21) Bolts
6 (#23) Washers
6 (#24) Nuts
Step 12: Side Panel Installation
Attach the Right Side Panel(#14) to the Bottom Panels as
shown in Figure 12 using 2 (#21) Bolts, 2 (#23) Washers, and
2 (#24) Nuts. Note bolt locations for side panel.
Hardware Needed for Step 12:
1 (#14) Side Panel
2 (#21) Bolts
2 (#23) Washers
2 (#24) Nuts
Step 13: Secure Side Panels
Secure each side panel by bolting a Rear Corner Brace(#15)
to the outside of the Side Panel(#14) using 5 (#21) Bolts, 5
(#23) Washers, and 5 (#24) Nuts per side. Figure 13 shows
left Rear Corner Bracket being attached.
Attach right side the same way.
Hardware Needed for Step 13:
2 (#15) Rear Corner Braces
10 (#21) Bolts
10 (#23) Washers
10 (#24) Nuts
Page 9
