ALCOVE BATHTUB
INSTALLATION INSTRUCTIONS
WARNING: All plumbing installations must be done in accordance
to legal regulations.
ATTENTION!
Before installing the bathtub:
•
Make sure all wood studs and supports are properly installed.
•
Verify all the necessary plumbing is installed by a certified plumber.
•
Floor drain and trap are not included. Make sure to install according to
local and legal regulations.
1.
Read the complete instruction manual before beginning installation.
2.
Confirm that your model will fit in intended location and plumbing fixtures are
located where legally required before beginning installation.
3.
Not all drawings on this manual are drawn to scale. Please refer to the model chart.
4.
Walls and sub-floor must be solid, and square.
5.
Always use drop cloth to protect bathtub from damage during installation.
6.
Two people must be used at all times to move and install bathtub.
Roughing-in
•
Rough plumbing must be pre-installed by a certified plumber before Alcove Bathtub
installation.
• If floor drain-hole installation is needed, contact a certified plumber.
• Place tub at final desired location and verify floor drain and bathtub drain align.
L
W
— 6 —
Studs must be
flush and square
L
W
Rough-In
Wall studs
