ALCOVE BATHTUB
INSTALLATION INSTRUCTIONS
Attaching cast iron bars
ATTENTION! Assemble bathtub on drop cloth or rug to protect its surface.
1.
Flip tub on upside-down using a drop cloth for protection.
2.
Slide hook end of iron cast bar into position as seen in picture.
3.
Use level tool to verify apron is vertical to the ground.
4.
Screw cast iron bar (flat end) into raised wood platform on bottom of tub.
5.
Repeat for all three supports.
— 7 —
Cast Iron bars
Screws
Drop Cloth
Level
Screws
Raised Wood
Cast Iron bar
Hook