background image

—  1  —

If you have any questions or concerns please contact us:

1-434-623-4766

info@swissmadison.com

PRIOR TO INSTALLATION:

· 

Inspect toilet to ensure no damages have occurred while in shipping.

 

· 

Observe all plumbing and building codes in accordance with your state and local requirements.

 

· 

All dimensions are nominal! Be sure to measure your toilet prior to installation.

 

· 

The step-by-step guidelines in the installation instructions are a general reference. Should there be 
any discrepancies, Swiss Madison cannot be held liable. It is recommended to install all Swiss 
Madison products by hiring a licensed professional.

 

· 

Read installation and maintenance instructions thoroughly before installing. Be sure to use proper 
tools and always wear proper personal safety accessories for your protection. 

 

· 

Two people are recommended to handle and install this product as it is fragile. 

REQUIRED PARTS:

SUGGESTED TOOLS & MATERIALS:

Safety 

Glasses

Wrench

Level

Screwdriver

Putty Knife

Tape 

Measure

Hacksaw

Flexible 

Supply Tube

Wall-Hung

Toilet

Allen 

Wrench

Set 

Screws

Set Screw 

Installation 

Tubes

Notched 

Pegs

Retaining 

Bolts

Retaining 

Bolt Key

Outlet Pipe & Inlet Pipe

(Included with tank carrier system  

- sold separately)

WALL-HUNG TOILET 

   INSTALLATION INSTRUCTIONS

Summary of Contents for Monaco SM-WT460








Reviews: