15, Jalan Kilang Barat, #06-01 Frontech Centre, Singapore 159357
Tel +65-6276’1005 ,Fax +65-6276’1006
www.swisspro.sg
info@swisspro.sg
Removing Filters Set – cont.
(4)(a) To disconnect the hoses from
the valves, firstly to take out the
locking clips at the valve.
(4)(b) Then apply pressure to the
valve to loosen the hose.
(4)(c) And at the same time pull
the hose out.
(5) Once at the sink, open the filter
housing(s) by twisting the body
anti-clockwise.
(6) After replacing or cleaning the filter(s), put back the filter set and connect
all the hoses back accordingly. Do make sure that all the connections are
tightened.
Please monitor and check for any leakages at all the connection points at
least 10 – 15 minutes before turning on the power.
If in doubts, please call the service center for assistance.
