5
PLAN AHEAD TO PROTECT YOUR EYES, HANDS, FACE, EARS.
KNOW YOUR SANDER.
Read and understand the operator’s manual and labels affixed to the tool. Learn its
application and limitations as well as the specific potential hazards peculiar to the tool.
To avoid injury from accidental contact with moving parts:
KEEP GUARDS IN PLACE and in working order.
Don’t do layout, assembly, or setup work on the sander while any parts are moving.
PLAN YOUR WORK
USE THE RIGHT TOOL. Don’t force tool or attachment to do a job it was not designed to do.
Caution: This machine is not designed for heavy deburring operations. When finishing metal sparks or
hot fragments could cause a fire. To avoid this:
-
Disconnect any dust collecting hose from the sander
-
Remove all traces of wood dust from inside the sander.
-
Remove all traces of metal dust from inside the sander before sanding wood again.
Dress for safety.
Any power sander can throw foreign objects into the eyes. This can cause permanent eye damage. Wear safety
goggles.
Do not wear loose clothing, gloves, neckties or jewelry (rings, wrist watches). They can get caught and draw you
into moving parts.
WARRANTY
To ensure the proper functioning of its products, to meet the best standards of quality, durability and to ensure the
consumer / retail customer that any of our products are of no defects in materials and operation of the DKSH
Group is committed as follows:
1 YEAR WARRANTY ON ALL PARTS OF ELECTRICAL AND MECHANICAL
2 YEAR WARRANTY ON DEFECTS IN CONCEPT
This warranty will be invalid in case of misuse or abuse directly and indirectly, negligence, accidents, normal wear
and tear, repairs or modifications made by us or in case of lack of maintenance.
The warranty granted by the DKSH Group is limited to the period referred to above.
The warranty period is for an 8-hour daily operation. If you exceed this time frame, the warranty period is reduced
in proportion to the operating surplus, in each case up to a maximum of 3 months.
For the warranty to apply, you will need to send back for inspection by the product or part of it, prepaid, to an
authorized service center, established by our office. The goods must be accompanied by a document certifying
the purchase date and problem (invoice or receipt with a legible reported the item purchased, receipts will not be
accepted or illegible entries generic as "different", etc. where section 1 of course cannot be identify with certainty
the item purchased).
If as a result of our review will be found the defect, will repair or replace the product.
The warranty covers only the value of the machine, even if any failure is not warranted to be entitled to
compensation for loss of production or other economic losses related to non-use of the product itself.
We will then return the product repaired or replaced at the expense of DKSH same, but if as a result of control will
not find any fault, or if the defect has been caused by reasons that are not covered by the warranty, the purchaser
must bear the costs of filing and returning the consignment.
We reserve the right to make changes to parts, accessories and equipment, for any reason deemed necessary.
TECHNICAL SERVICE
All power tools and accessories are engineered and controlled by using the most modern and safe production
techniques. Nonetheless, in case of malfunctions, your machine has to be repaired by a Service Center
authorized by SWISStec.