7
STRUCTURE AND FUNCTIONS
This portable planer is a transportable electric tool. The machine is driven by a single- phase series motor, and it
is double insulated. It is only used to plane wood. It has the characteristics of rational structure, easy operation
and high efficiency.
Refer to Figure 3
Figure 3
POWER SOURCE
WARNING:
Do not connect planer to the power source until all assembly steps have been completed.
The motor is designed for operation on the voltage and frequency specified. Normal loads will be handled safely
on voltages not more than 10% above or below specified voltage. Running on voltages, which are not within
range, may cause overheating and motor burnout. Heavy loads require that voltage at motor terminals be not
less than the voltage specified on nameplate.
GROUNDING INSTRUCTIONS
Refer to figure 4
Properly Ground Outlet
Figure 4
2- Prong Plug
WARNING:
Improper connection of equipment grounding conductor can result in the risk of electrical
shock. Equipment should be grounded while in use to protect operator from electrical shock.
- Check with a qualified electrician if you do not understand grounding instructions or if you are in doubt
as to
whether the tool is properly grounded.
- This tool is equipped with an approved power cord rated at 230V and a 2- prong grounding type plug for you
protection against shock hazards.
- Grounding plug should be plugged directly into a properly installed and grounded 2-prong grounding- type
receptacle, as shown.
Circle Breaker
Summary of Contents for ST-330 TP
Page 13: ...13 PART DIAGRAM ...
