6. Starting a washing programme
Wash Cycle Table
Program
Cycle Selection
Description
Detergent
Running
Energy
Water
Rinse
Information
of Cycle
pre/main
time(min)
(Kwh)
(l)
Aid
Pre-wash(50
)
For heaviest soiled crockery,
Wash (70
)
Rinse
and normally soiled pots
3/15g
Rinse
140
0.9
10
Intensive
pans dishes etc. with dried
(or3in1)
soiling.
Rinse (70
)
Drying
For normally soiled loads,
Pre-wash
Wash (60
)
such as pots, plates,
3/15g
Rinse
120
0.7
8
Normal
glasses and lightly
Rinse (70
)
(or3in1)
Soiled pans.
Drying
This is a standard programme,
Pre-wash
and is suitable to clean normally.
Wash (50
)
Rinse
3/15g
180
0.61
6.5
It’s the most efficient programme
(*EN5 0242)
Rinse (70
)
(or3in1)
In terms of its combined energy
Drying
and water consumption for
that type of tableware.
For lightly soiled loads,
Wash (45
)
Rinse
75
such as glasses, crystal and
0.5
7.0
Glass
Rinse (60
)
fine china.
Drying
For lightly soiled crockery
Wash(65
)
90
0.65
7.0
Rinse(70
)
90 min
and glasses.
Drying
A shorter wash for lightly soiled
Wash (40
)
15g
30
0.23
6
Rinse
Rapid
loads and a quick wash.
Rinse (40
)
Fruit
This is fruit wash
Rinse
/
0.01
4.3
This program provides an
Wash (70
)
15g
Rinse
80
Self-cleaning
effective cleaning of the
Rinse (65
)
(Or1piece)
0.58
6.6
dishwasher itself
Drying
NOTE:
*EN 5 0242 : This programme is the test cycle. The information for comparability test in
accordance with EN 50242, as follows:
Capacity: 6 setting
Rinse aid setting: 6
The power consumption of off-mode is 0.45W
left-on mode is 0.49W
Turning On the Appliance
Starting a wash cycle...
Pull out the basket(see the section entitled:
Loading the Dishwasher.
Pour in the detergent (see the section entitled
Salt,
Detergent and Rinse Aid”
Insert the plug into the socket. The power supply is 220-240 VAC
50 HZ, the specification of the socket is 10 A 250 VAC.
Make
sure that the water supply is turned on to full pressure.
Press the program button, the wash program will be changed as follows :
ECO->Glass->90min->Rapid->Fruit->Self-cleaning->Intensive->Normal;
If a program is selected, the response light will light. Then press the
Start/Pause
button, the dishwasher begins to start.
NOTE:
When you press the
Start/Pause
button to pause during washing,
the program light will stop blinking and the dishwasher will make a noise every
minute unless you press the
Start/Pause
button to start.
11