13
First steps
Aton CL700 IP LBA / Swisscom EN internet / A31008-M1713-F161-1-XXXX / starting.fm / 16.10.06
Ve
rs
ion 4,
16
.09.
2005
– It may not have been possible to
dynamically assign an IP address to
the phone
or
– You have assigned a static IP address
to the phone that has either already
been assigned to another LAN sub-
scriber or does not belong to the
router's address block.
¤
Find the IP address using the hand-
set menu:
v
¢
Ð
¢
¤
If no connection can be established,
change the settings on the router
(activate DHCP server) or the
phone's IP address.
Provider registration failed!
u
Your personal data for registering with
the VoIP provider may have been
entered incompletely or incorrectly.
¤
Check your entries for
Authent. Name
and
Authent. Password
. In particular,
check your use of upper and lower
case.
To do this, open the following menu
on your handset:
v
¢
Ð
Settings
¢
Telephony
¢
VoIP
¢
Provider Registr.
Belt clip and headset
By using a belt clip and headset you can
easily make your handset a constant com-
panion both inside the building and in its
immediate vicinity.
Attaching the belt clip
There are notches for attaching the belt
clip on the side of the handset at the same
height as the display.
¤
Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage with the notches.
Connection socket for headset
You can use headsets with jack connec-
tors. The following models have been
tested and are therefore recommended:
HAMA Plantronics M40, MX100 and
MX150.
The transmission quality of other models
cannot be guaranteed.
Note:
If port forwarding is activated on your router
for the ports that have been registered as the
SIP port (Standard 5060) and the RTP port
(Standard 5004), it makes sense to deactivate
DHCP and assign the phone a static IP address
(otherwise you may not be able to hear the
other party during VoIP calls):
– Via the handset menu:
v
£
Ð
Settings
£
Base
£
Local Network
