63
Operating the base station on the PABX
Aton CL700 IP LBA / Swisscom EN internet / A31008-M1713-F161-1-XXXX / settings_bs_hs_pabx.fm / 16.10.06
Ve
rs
ion 4,
16
.09.
2005
Setting pauses
Changing pause after line seizure
You can set the length of the pause
inserted between pressing the talk key
c
and sending the phone number.
v 5 5 O 1 L
~
Enter a number for the length
of the pause (
1
= 1 sec.;
2
= 3 secs.;
3
= 7 secs.) and
press
§OK§
.
a
Press
and
hold
(idle status).
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v 5 5 O 1 1
~
Enter a number for the length
of the pause (
1
= 1 sec.;
2
= 2 secs.;
3
= 3 secs.;
4
= 6 secs.) and press
§OK§
.
a
Press
and
hold
(idle status).
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need touch tone dialling
(DTMF) for a connection (e.g. to listen to
the network mailbox) you must switch to
touch tone dialling for the call.
Precondition
: You are currently conduct-
ing an external call via the fixed network
or you have dialled an external fixed net-
work number or an external call is sig-
nalled.
§Options§
Open menu.
Tone Dialing
Select and press
§OK§
.
Touch tone dialling is now activated
for
this call only
.
