background image

8

WARRANTY

9.

Any claim made under this warranty must adhere to the Warranty Policy described below:

The warranty will be granted by SWISSMEX RAPID SA DE CV when the product presents manufacturing, assembly or material defects 

and this has been established after conclusive analysis at Swissmex plant (Lagos de Moreno, Jalisco, Mexico). The warranty consists 

of replacement of damaged parts or replacement of damaged equipment depending on conclusions of the analysis of the claim. This 

warranty does not include labor installation costs or shipping costs.

The warranty of your product can be PREMIUM, MEDIUM or BASIC, depending on which category your equipment belongs to.You can 

check this on the Operator’s Manual and our website at www.swissmex.com.

The applicable warranty period can be: 

Advanced Line = 3 years

Professional Line = 2 years

Heavy duty = 1 year

THIS WARRANTY WILL BE INVALID UNDER THE FOLLOWING CIRCUMSTANCES:

1.  When the product presents faults due to abuse, misuse or inadequate maintenance, lack of proper cleaning and rinsing according to 

     the instructions contained in the Owner’s manual.

2. For the purpose of this warranty the use of any chemical solution listed as dangerous or different from those recommended in the 

     Operator’s Manual will be considered as misuse.

3.  When the product has undergone modifications or adaptations by unauthorized persons or by the use of spare parts that have not 

     been provided by SWISSMEX-RAPID.

4. When the product has been damaged as a result of natural disasters.

5. When the fault is caused by normal wear of the parts due to use.

   

SWISSMEX-RAPID is not responsible for indirect or consequential damages arising from the use or operation of the product, damages 

resulting in personal injury, economic loss, loss of property, loss of income or profits or costs of removal, installation or reinstallation.

 

SWISSMEX-RAPID, makes no other express warranty with the exception of the one quoted here. This warranty gives you specific legal 

rights and you may have other rights that vary from country to country.

 

To make this warranty valid, contact your dealer and present proof of purchase.

Always store the sprayer clean and empty in a dry place protected from the sun.

STORAGE

8.

Contac us / Contáctanos:

www.swissmex.com

exports@swissmex.com.mx

Calle Swissmex No. 500

Lagos de Moreno Jal. México

Tels: +52 474 741 2216

800 849 19 92

Summary of Contents for SW 501175

















Reviews: