background image

Thomann GmbH  •  Hans-Thomann-Straße 1  •  96138 Burgebrach  •  www.thomann.de  •  info@thomann.de  

       

DocID: 540648_29.04.2022

HDMI 2.0 Audio Extractor

EN

Quick Start Guide

This quick start guide contains important information on the safe operation of the 
product. Read and follow the safety advice and instructions given. Retain the quick 
start guide for future reference. If you pass the product on to others please include this 
quick start guide.

For the transport and protective packaging, environmentally friendly materials 
have been chosen that can be supplied to normal recycling. Ensure that plastic 
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected 
for recycling. Please follow the notes and markings on the packaging.

This product is subject to the European Waste Electrical and Electronic Equip-

ment Directive (WEEE) in its currently valid version. Do not dispose of your old 
device with your normal household waste. Dispose of this product through an 
approved waste disposal firm or through your local waste facility. Comply with 
the rules and regulations that apply in your country. If in doubt, consult your local 
waste disposal facility.

Using the product

1.  Connect the HDMI output of the desired device to the HDMI IN socket using a 

suitable HDMI cable.

2.  Connect the HDMI input of a suitable display to the HDMI OUT output. If you 

want this display to also play audio, press the ARC switch (ARC = audio return 
channel). The ARC LED then lights up and there is no audio signal on the S/PDIF 
and L&R outputs.

3.  To further process the audio signals digitally, connect a suitable device to the 

optical S/PDIF output via a Toslink fiber optic cable. To output audio in 5.1 
format, set the ADV 2CH 5.1CH switch to the 5.1CH position. If stereo output 
is desired, set the ADV 2CH 5.1CH switch to the 2CH position. The ARC switch 
must then not be pressed and the ARC LED must not light up.

Operating elements

q

  Connection for power adapter

w

 PWR 

  power indicator

e

  HDMI IN 

  HDMI input

r

  ARC LED 

  Audio mode indicator

t

  ARC switch 

–  Turns audio/video separation on/off

y

  ADV 2CH 5.1CH 

  Audio mode toggle switch

u

  HDMI OUT 

–  HDMI output

i

  HDMI LED 

–  HDMI status indicator

o

  SPDIF 

–  Toslink audio output (S/PDIF optical, digital)

a

  L 

–  Analogue audio output 'left'

s

  R 

–  Analogue audio output 'right'

Safety instructions

Intended use

This device is used to separate video and audio from HDMI signals. Any other use is 
considered to be improper and may result in personal injury or property damage. No 
liability will be assumed for damages resulting from improper use.

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are 
not within reach of babies and young children. Choking hazard! Ensure 
that children do not detach any small parts from the product. They could 
swallow the pieces and choke!

Where to use the product

Never use the product 
•  in conditions of extreme temperature or humidity
•  in extremely dusty or dirty areas
•  in locations where the unit can become wet
•  in locations with high levels of electrostatic or magnetic radiation

General handling

•  To prevent damage, never use force when handling the product.
•  Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use 

liquid cleaners such as benzene, thinners or flammable cleaning agents.

4.  To further process the audio signals in analogue form, connect a suitable device 

to the RCA sockets L and R. The ADV 2CH 5.1CH switch must be in the 2CH posi-
tion. The ARC switch must then not be pressed and the ARC LED must not light 
up.

5.  Connect the device to a properly wired AC power outlet using the included 

power adapter. The device is immediately ready for use.

6.  When the device is switched on, the power indicator lights up red.

7.  After use, unplug the power adapter from the AC power outlet.

PWR

DC 5V

HDMI IN

ADV 2CH 5.1CH

ARC

 

R

L

HDMI OUT

SPDIF

 

Features

•  Converts an HDMI signal into an HDMI plus stereo audio signal
•  Input: HDMI
•  Outputs: 

HDMI, RCA (analogue L+R) and Toslink (S/PDIF optical, digital)

•  Resolution: 4 K × 2 K@60 Hz
•  Audio output manually switchable
•  Delivery includes PSU (5 V 

)

Reviews: