8. Audio
*1 When “Bar Frame” is set to “Off”, only the audio meter will be displayed
When “Bar Frame” is set to “On”, frame and real-time audio value will be displayed.
*2 Select Channel
Under analog signal, only channel1-2 can be displayed.
Under HDMI signal, channel1-2 and 1-8 can be selected.
Under SDI signal, channel 1-2, 1-8 and 1-16 can be selected
*3 When “Audio Alarm” is set to “On”, if no embedded audio is detected, the audio bar will display
“UNLOCKED”. If the audio value is too low, the audio bar will display “MUTE”.
*4 Audio channels can be selected to output according to the requirements.
When the current “Select Channel” is set to “Channel1-2”, the left channel and right channel
output can be selected from Channel1 or channel2.
When the current “Select Channel” is set to “Channel1-8”, the left channel and right channel
output can be selected from Channel1 to channel8.
When the current “Select Channel” is set to “Channel1-16”, the left channel and right channel
output can be selected from Channel1 to channel16.
In audio bar, the left channel information will be in green, and the right channel information will be
in red.
Channel 1-2 Channel 1-8 Channel 1-16
Summary of Contents for S-1273F
Page 22: ......
