SWIT S-1093H, User Manual

17 

2. Installation of S-7004F/D/J/C/U/E/B/V/I snap-on type DV battery plate: 

S-7004F/D/J/C/U/E/B/V/I DV plate is snap-on type, quick release and interchangeable. Please 
follow the instructions to install: 
 
(1) Please make sure the power terminals are clean and in well condition before use. 
(2) Align the S-7004 DV plates slots to the bolts of the monitor rear panel, and press tightly in.   
(3) Fix the S-7004 DV plates by provided screws on the top side. 
(4) Mount the corresponding battery to S-7004 DV plate to power the monitor. 
(5) To release the battery, press the battery release button to take out the battery 

·

·Installation of S-7004A/S Gold mount / V-mount battery plate

To use Gold mount or V-mount battery, please install the S-7004A/S plate as following 
instructions: 

  (1) Please make sure the power terminals are clean and in well condition before use. 

(2) Connect the wire of S-7004A/S to the 2-pin DC socket. 
(3) Align the S-7004A/S screw holes to the bolts of the monitor rear panel. 

  (S-7004A Gold mount plate need a spare bedding between the monitor and plate) 

(4) Fix the S-7004A/S mount by provided screws. 
(5) Mount Gold mount / V-mount battery to S-7004A/S to power the monitor. 
(6) Press the battery release to take down the battery