Rese�ng/Restar�ng the system
Restar�ng the system
To restart the central unit at any �me,
press on the micro switch next to the antenna
(see picture on right).
1.
Rese�ng users and passwords.
This reset does not reset the central
unit parameters, it only clears the users and passwords. Make a
short press
using a pin or paper clip in the factory reset hole between the power adapter
and the antenna at the back of the central unit
(short = 1 seconds)
2.
Factory Reset.
Warning
All the configura�on data will be deleted.
Make a
long press
using a pin or paper clip in the factory reset hole between
the power adapter connector and the antenna at the back of the central unit
(long > 5 seconds)
.
3. A factory Reset can also be done through the applica�on. It clears
all the system parameters!
Enter the “Se�ngs” Menu
Select “Reset Central Unit”
Type in the code 1234 or your
new code if you have changed it.
The system will reset.
Factory
reset hole
(Reset)
Micro
switch
(Restart)