1 - Product Manual
1
L1
L2
R2
R1
FEATURE SELECTION
Default - shows the time: hours (12 or 24 hours system), minutes,
month, date, and the day of the week
Press
L1
- the display light turns on
Press
R1
- shows month, date, and the day of the week
1.
2.
3.
4.
5.
6.
HOW TO SET ANALOG TIME
Open the latch (pull up) on the right side of the watch face between
R1 and R2, and pull out the crown gently
Rotate the crown left/right to adjust the time
Once set, push the crown back in and close the latch.
1.
2.
3.
While on the default display, press
L2
three times. Display will
change to Time Set Mode. You will see seconds digits flashing,
press
R1
to reset the seconds to zero (00).
Press
R2
once: Minutes digits will flash. Press
R1
to set up
minutes.
Press
R2
: Hour digits will flash, press
R1
to set the hour. Advance
to the desired hour. Keep pressing
R1
to cycle trough the 1-12
AM/PM (the 12 hours mode - A and P will show next to the hour) to
get to the 24 hours mode (H will show on display). Press
R2
to
keep setting date or Press
L2
to return to the default display.
1.
2.
3.
Press
L2
once - enter Stopwatch mode
Press
L2
twice - enter Alarm Set Mode (hours display will flash)
Press
L2
three times - enter Time Set Mode (seconds display will
flash)
Press
R2
- shows currently set Alarm Time.
HOW TO SET DIGITAL TIME/CALENDAR
