Photogate
S0016
Range: 0~∞s
Accuracy: ±1
μ
s
Resolution: 1
μ
s
In essence, the photogate sensor is a digital-switch sensor, with the
infrared emitter and infrared receiver at both ends respectively. If the
infrared receiver receives the light beam,the photogate sensor will be in
low-voltage (on-state); if the infrared beam is blocked off, and the
infrared receiver fails to receive the beam, the photogate sensor will be
in high-voltage (off-state).
Component
Usage
Connect the phtotgate sensor with universal port,then Connect the Universal port
into any port of the SensorDisc
When use phtotgate sensor, according to the experimental type and accessories,
we can set it as follows:
No. Type
Name Illustration
1
2
3
S3000
S0016
Universal port
Phtotgate
Trilobular screw
open ,click ,choose experimental type、type of light barrier,
then choose measured physical quantity, input related parameters,
click“OK”(because different set in different experiment,detailed
settings please refer to the 《SenseDisc All-in-one Experimental
Cases》)
Summary of Contents for SD0010
