background image

SWR LIMITED WARRANTY

SWR LIMITED WARRANTY

The 

PROFESSIONAL SERIES BASS SPEAKER ENCLOSURES

from SWR Sound Corporation are warrantied to

the original consumer purchaser for TWO YEARS from the date of purchase in the USA against defects in
materials and workmanship and provided that it is purchased from an authorized SWR dealer.

This warranty is VOID if the unit has been damaged due to accident, improper handling,installation or 
operation, shipping damage, abuse or misuse, unauthorized repair or attempted repair, or if the serial number
has been defaced or removed. SWR Sound Corporation reserves the right to make such determination on the
basis of factory inspection.

All liability for any incidental or consequential damages for breach of any expressed or implied warranties is
disclaimed and excluded herefrom.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of
incidental or consequential damages, so that the above exclusion may not apply to you. This warranty gives
you specific legal rights and you may also have other rights which vary from state to state.

For a complete list of Authorized SWR

Service Centers, and the latest SWR

news, interviews, and more, check out

our website:

SWR SOUND CORPORATIO

SWR SOUND CORPORATION

N

..

9130 Glenoaks Blvd.

Sun Valley, CA 91352 USA

PHONE: 

(818) 253-4797

FAX:

(818) 253-4799

EMAIL:

support@swrsound.com

WEB:

swrsound.com

swrsound.com

swrsound.com

PROFESSIONAL BASS SPEAKER ENCLOSURES MANUAL • Part # 320034 • 1/03

© 2003 SWR SOUND CORPORATION

SHOULD YOUR SWR

SHOULD YOUR SWR AMPLIFIER REQUIRE SERVICE OR REPAIR, 

AMPLIFIER REQUIRE SERVICE OR REPAIR, 

PLEASE USE THE FOLLOWING PROCEDURE:

PLEASE USE THE FOLLOWING PROCEDURE:

Locate your original receipt showing date of purchase, model and serial number.

Determine the closest SWR Authorized Service Center to your location.  The fastest way to get a complete list of
SWR Authorized Service centers is on the web, at:

http://www.swrsound.com/service/servicecenternetwork.html

You can also get this information by calling the factory at (818) 253-4797, prompt 3 (service).

In the case where the unit must be shipped, pack your unit carefully (using original packaging whenever possible),
and include a copy of your bill of sale.  Ship the unit PREPAID to the SWR Authorized Service Center of your choice.

SWR Sound Corporation will provide free repair (parts and labor), or replacement at our option, on units determined
to be under warranty.  In the case of shipping, the SWR Authorized Service center will return the repaired unit to you
FREIGHT COLLECT.

1

1

2

2

3

3

4

4

22 • BASS SPEAKER ENCLOSURES OWNER’S MANUAL

Summary of Contents for Big Ben

























Reviews: