background image

I m p o r t a n t     S a f e t y     I n s t r u c t i o n s

  This symbol warns the user of dangerous voltage levels localized within the 

enclosure.

  This  symbol  advises  the  user  to  read  all  accompanying  literature  for  safe 

operation of the unit.

  Read, retain, and follow all instructions.  Heed all warnings.

  Only connect the power supply cord to an earth grounded AC receptacle in accordance 

with the voltage and frequency ratings listed under INPUT POWER on the rear panel of 
this product.

 

WARNING: 

 To prevent damage, fire or shock hazard, do not expose this unit to rain or 

moisture.

  Unplug the power supply cord before cleaning the unit exterior (use a damp cloth only).  

Wait until the unit is completely dry before reconnecting it to power.

  Maintain at least 6 inches (15.25 cm)of unobstructed air space behind the unit to allow 

for proper ventilation and cooling of the unit.

  This product should be located away from heat sources such as radiators, heat registers, 

or other products that produce heat.

  This product may be equipped with a polarized plug (one blade wider than the other).  

This is a safety feature.  If you are unable to insert the plug into the outlet, contact an 
electrician  to  replace  your  obsolete  outlet.    Do  not  defeat  the  safety  purpose  of  this 
plug.

  Protect the power supply cord from being pinched or abraded.

  This  product  should  only  be  used  with  a  cart  or  stand  that  is  recommended  by  the 

manufacturer.

  The power supply cord of this product should be unplugged from the outlet when left 

unused for a long period of time, or during electrical storms.

  This product should be serviced by qualified service personnel when: the power supply 

cord or the plug has been damaged; or objects have fallen, or liquid has been spilled onto 
the product; or the product has been exposed to rain; or the product does not appear to 
operate normally or exhibits a marked change in performance; or the product has been 
dropped, or the enclosure damaged.

  Do not drip nor splash liquids, nor place liquid filled containers on the unit.

 

CAUTION:

  No user serviceable parts inside, refer servicing to qualified personnel only.

  SWR®  amplifiers  and  loudspeaker  systems  are  capable  of  producing  very  high  sound 

pressure  levels  which  may  cause  temporary  or  permanent  hearing  damage.    Use  care 
when setting and adjusting volume levels during use.

  Hazardous voltages may be present within the cabinet even when the power switch is off and 

the power cord is connected.  Therefore, disconnect the power cord from the rear panel power 
inlet before servicing.  The power inlet must remain readily operable.

ENGLISH - PAGES . . . . . . . . . . . 6-9

ESPAÑOL   - PAGINAS . . . . . . . 10-13

FRANÇAIS - PAGES . . . . . . . . . . 14-17

ITALIANO   - PAGINE . . . . . . . . 18-21

DEUTSCH - SEITEN . . . . . . . . . . 22-25

PORTUGUÊS - PAGINA  . . . . . . 26-29

  

         . . . . . . . . . . . . . 30-33

Summary of Contents for WorkingPro 10








Reviews: