5. Here, a value between 0 and 40 can be set. The value of 40 is set by default and allows the scooter running about 20
km/h in the slow speed mode. When a value of 19 or 20 is set, the scooter moves about 6 km/h fast - so just try it until the
desired speed is reached.
6. The value you can change by first pressing the „MODE“ button until the current value flashes and then repeat pressing
the „MODE“ button for a higher value or the „ON / OFF“ button for a lower value until the wanted limit is displayed.
7. After the desired value is set, press the „ON / OFF“ and the „MODE“ button simultaneously for about 2 seconds until the
display jumps back to the start screen.
8. The wanted speed in the slow mode is now saved & setting process completed.
9. IMPORTANT !!! Avoid changing any other menu settings except point P15 in any case in order to avoid malfunction or
damage on the vehicle.
Coasting: Remember to always ride with your electric scooter in the turned “ON” position. To COAST, while in motion,
release the speed controller trigger completely. While coasting, you will gradually lose speed. You can accelerate again at
any time by squeezing the speed controller trigger. You can accelerate and coast intermittently at any time. To brake while
coasting, follow normal braking procedures.
Go...
Don’t ride into or over water: Use Caution Going Uphill Riders over 200 lbs., or those ascending steep inclines, can
unduly strain the drive system, resulting in serious damage.
IMPORTANT:
IF YOUR ELECTRIC SCOOTER CANNOT MAINTAIN A SPEED OF 5 M.P.H. AT FULL THROTTLE ON AN INCLINE,
THE INCLINE IS TOO STEEP. IMMEDIATELY RELEASE THE SPEED CONTROLLER TRIGGER FULLY AND KICK SCOOT
TO ASCEND. FAILURE TO DO SO MAY RESULT IN SERIOUS DAMAGE. NEVER OPERATE THE ELECTRIC SCOOTER
AT SPEEDS GREATER THAN 15 M.P.H., OR T ANY SPEED THAT YOU CANNOT SAFELY EXIT THE SCOOTER ON
FOOT. KNOW YOUR ABILITIES AND ALWAYS WEAR PROPER FOOTWEAR!
INSTRUCTIONS
SXT-SCOOTERS
8
