Keep It Lubricated
A little oil goes a long way. Clean and lubricate the folding mechanism. Use just a drop or two of 3-in-1™ oil or 5w-30w
synthetic mo- tor oil on a Q-Tip™ to lubricate the spot where the hinge pin slides in and out of the locking position on
each side of the steering head. Also apply just one drop of 3-in-1™ oil or 5w-30w synthetic motor oil at each pivot point.
It’s very important to use just a small amount of oil when lubricating the folding mechanism. Using excessive oil causes
your electric scooter to become overly sticky, resulting in trapped dirt and grit. This excess dirt and grit can damage the
unit. Also, conventional motor oil gets sticky very quickly compared to synthetic motor oil or 3-in-1™ brand oil.
Clean and lubricate the steering mechanism by applying one drop of 3-in-1™ brand oil at each part of the steering hinge.
As with the folding mechanism, any excess lubricant can attract dirt and grit and damage the steering components.
Removing a Tire:
Removing a tire from your electric scooter for cleaning, lubrication, or replacement is quick and easy. Use an adjustable
wrench to remove the nut from the wheel axle bolt. Once the wheel axle bolt is removed, the tire will be free.
Changing Your Deckboard:
Your electric scooter has multiple deckboard designs available so you can change the look of your electric scooter to suit
your taste or mood! To remove the deckboard, simply unscrew the deck screws with a sturdy Phillips screwdriver. Avoid
leaving the battery unprotected for any extended period of time.
DO NOT ATTEMPT TO TAMPER WITH ANY OF THE ELECTRONICS BELOW THE BOARD ONCE REMOVED AS THIS MAY
DAMAGE THE UNIT AND VOID YOUR WARRANTY.
How it works...
INSTRUCTIONS
SXT-SCOOTERS
10
