E
3.4 Riding Operation
Getting Ready!
1. Choose a suitable venue for riding.
2. Unfold the scooter in accordance with the instructions and make sure the safty pin is
engaged.
3. Adjust the T-pipe to the suitable height according to your height.
2. Start
1. Press the power button to turn on the power.
2. Stand one foot on the scooter and leave another foot on the ground.
3. Gently press down on the right thumb accelerator, the scooter will immediately move
forward slowly. Place the previous foot on the scooter. Press the right thumb accelerator with
your right thumb. The greater pressure you put, the faster it will go.
3. Brakes
1. Electromagnetic brake - pressing the left thumb electronic magnetic brake will activate the
electromagnetic brake, which will power off the scooter and apply the brake. The more you
press, the greater the braking force will be.
2. Mechanic brake - The Scooters also have a mechanic brake, which is activated by
pressing with the foot on the rear fender.
This also activates a sensor that stops the front wheel motor.
4. Cruise control
This option allows the user to set and maintain a constant speed, without keeping the
acceleration lever pressed. Press the acceleration right thumb and keep the same speed for
5 seconds and the cruise control will automatically begin. Then you can release
the acceleration lever, and the scooter will continue cruising with the same speed. You can
switch the function off easily as well, by pressing the brake or acceleration lever gently.
The cruise control function is not activated by default, you need to activate it after
the purchase of the scooter. This function can be activated or deactivated from the central
control unit, according to the user’s needs.
Summary of Contents for Light Plus
