32
Driving
5.1 DRIVING
Preparation
1. find suitable terrain
2. fold up the scooter according to the instructions (Page 28)
Drive off
1. press the POWER button to switch on the scooter
2. place one foot on the running board and leave the other on the ground.
Slowly and carefully push the right thumb throttle down and lightly tread on the scooter
with the foot on the ground. Remove the second foot from the floor and place this foot on
the running board as well. The more the thumb throttle grip is pressed, the more the scooter
accelerates and the faster the ride becomes.
Brakes
1. under normal conditions the left hand brake is pressed down and the electromagnetic brake
is activated and the scooter immediately slows down and the flow of energy to the motor
is interrupted The more the brake lever is pressed down the more the scooter brakes. The
electromagnetic brake also activates the KERS system (kinetic energy recovery system), which
feeds the braking energy back into the battery in the same way as on Formula 1 cars.
2. the “SXT MAX eKFV” have a brake lever attached to the right handle, with which the drum
brake on the rear wheel can be operated.
Kick start function
This function is for your safety. If the scooter is to be used, you must kick / drive it with one
foot to set the scooter in motion and then press the thumb throttle grip first and the scooter
will start moving with motor power. This protects the motor and prevents the scooter from
accidentally setting itself in motion if the throttle stick is pressed accidentally.
Maximum speed limit
The options for the maximum speed are 10 km/h, 15 km/h, 20 km. This function can be
activated or deactivated from the central control unit according to the user’s needs.
