| 12
|
MANUAL
CONTROLS ON THE HANDLEBAR
ON/OFF
Press the switch for 1 second, the display lights up to indicate that the vehicle is
activated. Press for 3 seconds to turn off the vehicle. If the scooter is not used for 3
minutes, it will automatically turn OFF.
Speed control
Press the right thumb throttle to accelerate the scooter.
Braking control
Press the left thumb brake lever to activate the electromagnetic brake. The more the
lever is pressed, the stronger the braking effect.
Horn
Activate the vehicle and press the horn button to use the horn.
LED Headlight
Press the light switch in manual scooter mode without the engine activated. A sign in
the display indicates that the front light is activated. Press the switch again to turn the
light off.
For Example: If the weather is cloudy and Auto Light Mode is active, the light will turn
on automatically. When the clouds clear and the weather becomes brighter again, the
brightness sensor registers this and switches the light off again. In Auto Light Mode, the
display illumination is also switched on or off depending on the measured brightness.
The Auto Light Mode is terminated by pressing the Light ON/OFF switch once.
Odometer display
If the display is switched on, 2 modes are available: ODO and Trip. These can be changed
by pressing the Setting button. In “trip” mode, pressing the (S) button for 3 seconds will
clear the current data.
Emergency braking
In an emergency, it is recommended to use the rear foot brake.
