| 8
|
MANUAL
BEFORE STARTING JOURNEY
Mechanical safety check:
Before using the SXT LIGHT GT: Perform a visual inspection for any loose screws
and other parts. Make sure everything is in place and no parts are missing or showing
severe wear. If you are unsure, be sure to contact your dealer or technical support
immediately!
Preparation
1. search for suitable terrain
2. unfold scooter according to instructions (p.14)
3. adjust handlebar according to body size
Driving off
Press the POWER button to switch on the scooter.
2. Place one foot on the footboard and keep the other foot on the ground.
3. slowly and carefully press down the right thumb throttle - the scooter will
immediately move slowly forward. Take the second foot off the ground and place it on
the footboard as well. The more the thumb throttle is pressed, the more the scooter
accelerates and the faster the ride.
Braking
1. Under normal conditions, the right thumb brake lever is pressed down and the
electromagnetic brake is activated and the scooter slows down immediately and the
energy flow to the motor is interrupted. The harder the brake lever is pressed down the
harder the scooter brakes. The electromagnetic brake also activates the KERS system
(kinetic energy recovery system), which feeds the braking energy back into the battery
in the same way as on a Formula 1 car.
2. The SXT LIGHT GT also has a conventional mechanical foot brake at the rear.
Through the mechanical brake, the scooter is braked at the rear axle. No matter what
situation you are in - if the first system fails, you still have the mechanical foot brake on
the rear axle available in any case.
