29
Repair and Maintenance
3.1 ASSEMBLE THE HANDLE BAR
3. before riding, check that the
handlebar is tight by applying
pressure, the handlebar should
not move backwards or for-
wards.
Align the handlebar vertically
and horizontally with the clamps
(A & B). Install the 4 bolts (C) and
lock nuts (D) and hand tighten
them.
Tighten the screws evenly with a
5 mm hexagon wrench (E) and 10
mm open-end wrench (F).
3.2 INFLATE TIRES
The tires are infl ated to the maximum air pressure
before shipping, but some air pressure may be lost
between the date of manufacture and your date of
purchase.
Use a hand pump with a Schrader valve and a pres-
sure gauge to infl ate the tires to the recommended
pressure indicated on the tire. It is not recommended
to use pressure systems like those found at gas sta-
tions, as these are designed to infl ate car tires, which
have a much higher air volume.
REAR TIRE PSI: 30 MAX
(max 2,1 bar)
Summary of Contents for SCOTEX SPIKE
Page 1: ...Handbuch SCOTEX Spike ...
Page 7: ...7 Identifizierungsnummer Kennzeichen ...
Page 20: ......
Page 21: ...Manual SCOTEX Spike ...
