2 0 6 3 6 5 R e v. 8 0 9 U F S . 1 0 . 8 0 9 . 7. U
S p a F e n g S h u i - P a g e 3 5
Owner’s Manual
SECTION 11 |
Advanced TroubleShooting
1 1 . 2
|
T R O U B L E S H O O T I N G
Always try to restart the capsule before any troubleshooting.
LCD Display Error Messages
M E S S A G E
T R I G G E R
P R O B A B L E C AU S E
C O R R E C T I V E A C T I O N
System damage!
Plug is loose
Capsule is blocked
Press ON/OFF switch
HOOD OPEN!
Hood opening
Plug is loose
Faulty magnetic switch
See “Hood Switch”
READY
Warm-up program is finished
—
Press ENTER to selections
NOT READY
Warm-up program is
System is warming up
currently running (7 min.)
NO INCOMING
Wall faucet is closed
Open wall faucet
Water pressure loss
WATER TANK
Wall faucet is closed
Open wall faucet
Generator filling valve faulty
Check valve 29 connections
and power
Water pressure loss
Check the water filter for proper operation
HEATER
The steam generator
Thermal fuse is blown
thermal fuse is blown
ADD up to 300 ml
Add aroma liquid
AROMA LIQUID!
Aroma tank is empty
Level sensor adjustment
Adjust the sensitivity level sensor
of sensitivity
Level sensor plug is loose
See “Aroma System”
Level sensor wrong position
See “Aroma System”
Level sensor faulty
See “Aroma System”
FILL THE WATER
System does not have
Add distilled water
enough water to run a session
Upper level sensor faulty
plug is loose
Upper level sensor faulty
See “Replacing the Water Level Sensor”
Data communication
between upper PC
board (LCDrx) and
lower PC board
(Rabbit) is loose
Check the plug connections
between upper and lower PC boards
Check the plug between magnetic
switch and PC board
Press ESCAPE to get back
to MAIN MENU
Restart the Spa-Feng Shui™ 2G
using ON/OFF switch
Spa-Feng Shui 2G steam
generator did not get the water
during 15 sec. from injection
valve opening
WATER!!!
Generator filling valve faulty
Check the water filter for
proper operation
Check valve connections
and power
Spa-Feng Shui™ 2G steam
generator did not get the
water during 25 sec. from
injection valve opening
EMPTY!!!
COMBUSTION!!!
(Heater fault)
See “Replacing the Thermal Fuse”.
Check the heating element - it may be
damaged as well
Aroma tank is empty
See “Aroma System”
Spa-Feng Shui 2G steam generator
does not have enough distilled water
to start the steam session
Check the connection between
sensor and PC board
TANK!
Spa Feng Shui Manual 809.qxp:DL_SFS_806 A4 NS 9/18/08 4:17 PM Page 40