Alarm output (cable: grey)
This can be used to control an alarm siren (12 V/DC, max. 2 A).
Input for door sensor (cable: brown)
The code lock uses a door sensor to emit an alarm when the door is opened without a valid
access attempt having been made previously using a transponder or fingerprint.
8. Mounting and connection
Do not mount or connect the product when it is connected to a power supply.
•
Unscrew the screw (see chapter 7, item E) on the bottom of the code lock (an L-key for
the special screw is included) and then remove the mounting plate on the back of the
code lock.
•
Attach the mounting plate to a wall using suitable screws. Depending on the surface,
dowels may also be required.
If necessary, drill a hole for the connecting cables before attaching the mounting plate.
12