Option 5: Tuning-in a user transponder without a specific user ID (the code lock auto
-
matically uses the next free user ID, but it is not possible to determine which one it is)
and the 8- or 10-digit transponder number:
•
The code lock must be in standby mode; the control LED lights up red.
• Activate programming mode, as described in chapter 10. b); then the control LED will flash
red. Example:
•
Press the button. The control LED will light up orange. The code lock is now in tuning-
in mode.
•
Enter the 8- or 10-digit transponder number. Press the
button to confirm. The control
LED will light up green briefly, and then orange again.
•
The new user transponder is saved.
A transponder that has already been tuned-in/saved cannot be used again. In this
case, the code lock emits 3 short beeps, the control LED flashes red and then
lights up orange again.
•
You can now tune-in another user transponder. To do this, enter the 8- or 10-digit tran-
sponder number.
•
To abort the tuning-in process and exit programming mode, press the button. The
control LED now glows red steadily, and the code lock is in standby mode.
35
