Proceed as follows:
•
The code lock must be in standby mode; the control LED lights up red.
• Activate programming mode, as described in chapter 10. b); then the control LED will flash
red. Example:
•
Press the button. The control LED will light up orange.
•
Enter the desired function for access mode:
= Access only via the transponder
= Access via the transponder or fingerprint (by default)
= Access only via the fingerprint
= Access via multiple different transponders/fingerprints
Directly after selecting function
, enter the required number of fingerprints/tran
-
sponders: ....
•
Press the
button to confirm your entry. The control LED briefly lights up green and then
flashes red (programming mode).
•
To exit programming mode, press the button. The control LED now glows red steadily,
and the code lock is in standby mode.
46
