The home technology brand for the entire house. More information at
www.sygonix.com
28
b) Changing Master Code
The master code is required for all programming of the code lock and therefore
should be selected accordingly.
The master code is “1234” in the factory settings after delivery (or after a reset).
For safety reasons, we urgently recommend changing the master code before
the code lock is put to use.
The master code can have 4 to 8 digits.
Note:
The code length of master code and user code must be the same.
If you programme a 5-digit master code, the user codes must have
5 digits as well.
If user codes are already programmed and you want to change the mas-
ter code length subsequently (e.g.
fi
rst 4, now 5 digits),
fi
rst reset the
code lock to factory settings (all programming is lost).
We recommend writing down the master code and keeping it in a secure loca-
tion.
Start the programming mode as described in chapter 8. a). The yellow LED must
be lit.
Then enter:
*00 “New master code”
Example 1:
The old master code is changed to “2222”.
Example 2:
The old master code is changed to “98765”.
If desired, you can programme other settings now or leave the programming
mode with the pound key (#).
