• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
•
Maintenance, modifications and repairs must be carried out by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Connected devices
• Always observe the safety information and operating instructions of any other de-
vices which are connected to the product.
c) Electrical safety
• Before connecting the product to the mains, make sure that your local AC mains
voltage matches the specifications on the nameplate.
• The product’s mains socket is designed to protection class I. Only use an earthed
mains socket (230 V/AC, 50 Hz) connected to the public grid to power the product.
•
Never pour liquids over electrical devices or place objects filled with liquid next
to the device. If liquid or a foreign object enters the interior of the device never-
theless, first power down the respective mains socket (e.g. switch off the circuit
breaker) and then pull the mains plug from the mains socket. Discontinue use and
take the product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into
a warm one. This may cause condensation to form, which can destroy the product.
Allow the product to reach room temperature before connecting it and putting it
into use. This may take several hours.
• The mains outlet must be located near to the device and be easily accessible.
• Always use the grips on the side of the plug to unplug the adapter from the mains
socket.
• Unplug the mains plug from the mains socket if you do not plan to use the product
for an extended period of time.
• For safety reasons, disconnect the mains plug from the mains socket during thun-
derstorms.
• Never insert or unplug the mains plug when your hands are wet.
•
Do not use the product in very dusty areas. There is a danger of fire and explosion!
• Never overload the product. Observe the maximum connected load (V x A) in
‘Technical data’.
• Do not connect in series! This can lead to an overload of the product! Fire hazard!
• Plug the earthed mains plug on the back of the USB charging adapter directly e.g.
into a wall socket.
• Do not operate while covered! At higher connected loads, the USB charging adap-
ter will get hot, which may lead to overheating posing a risk of fire if it is covered!
• De-energised only if unplugged!
d) Persons and product
• Use the connection for IT devices only.
• Always switch off the connected device before connecting/disconnecting the pro-
duct.
•
The product generates heat during use. Ensure that there is sufficient ventilation.
Do not cover the product during use.
• Do not short-circuit the USB outputs.
• Use the product only in a temperate climate, never in a tropical climate.
• Never leave the product and the connected device unattended during use.
• Always comply with the accident prevention regulations for electrical equipment
when using the product in industrial facilities.
Operating instructions
USB charging adapter, rotatable, 2x USB, 1x QC
USB charging adapter, rotatable, 2x USB, 1x type C™
Item no. 2256497
Item no. 2256498
Intended use
The product is suitable for supplying power or charging up to three compatible USB devices
(USB-A connections with item no. 2256497) as well as USB-A and USB-C™ connections (item
no.: 2256498). One charging output is Quick Charge-enabled or is USB-C™ with item no.:
2256498). Power supply of the USB charging adapter is provided by a regular home mains
socket with a protective earth contact. The mains line is looped through to a socket with a
protective earth contact on the front of the USB charging adapter, to which any load can be
connected (max. 16 A). The socket integrated into the product has enhanced protection against
contact and can be rotated by 180˚. The USB connections on the product have overload and
short-circuit protection.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such as a short circuit, fire or electric shock. Read the operating instruc
-
tions carefully and store them in a safe place. Only make this product available to third parties
together with its operating instructions.
This product complies with statutory, national and European regulations. All company and pro-
duct names contained herein are trademarks of their respective owners. All rights reserved.
Delivery content
• USB charging adapter
• 3 x Sticker
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
This product must only be used in dry, enclosed indoor areas. It must not become
damp or wet, as this may cause a fatal electric shock!
This symbol reminds you to read the operating instructions included with the pro-
duct.
This product has been CE tested and therefore complies with the necessary national
and European regulations.
Safety information
Read the operating instructions and safety information carefully. If you do not
follow the safety information and information on proper handling in these ope-
rating instructions, we will assume no liability for any resulting personal inju-
ry or damage to property. Such cases will invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dange-
rous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
