background image

c) Electrical safety

•  Never pull the mains plug from the socket by pulling at the cable. Always pull it from the mains 

socket using the intended grips.

•  Unplug the mains plug from the mains socket if you do not use the device for an extended 

period of time.

•  Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
•  Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under 

mechanical stress. Avoid excessive thermal stress on the mains cable from extreme heat or 

cold.

•  Do not modify the mains cable. Otherwise the mains cable may be damaged. A damaged 

mains cable can cause a deadly electric shock.

•  Do not touch the mains cable if it is damaged. First, power down the respective mains socket 

(e.g. via the respective circuit breaker) and then carefully pull the mains plug from the mains 

socket. Never use the product if the mains cable is damaged.

•  A damaged mains cable may only be replaced by the manufacturer, a workshop commissioned 

by the manufacturer or a similarly qualified person, so as to prevent any danger.

•  Never plug in or unplug the mains plug when your hands are wet.
•  Connect the appliance to a wall socket that can be accessed easily.
•  Never connect or disconnect if your hands are wet.
•  Never unplug from the mains socket by pulling on the cable; always use the grips on the plug.
•  When setting up, make sure that the cable is not pinched, kinked or damaged by sharp edges.
•  Always lay the cables so that nobody can trip over or become entangled in them. This poses 

a risk of injury.

•  The product is equipped with an enhanced protection against accidental contact. An integrated 

mechanism will release the holes of the receptacle only, if the two prongs of a power plug are 

inserted into the two holes at once.

•  Take special caution when children are around. Children cannot recognize the danger arising 

from the incorrect use of electrical devices. There is a risk of a life-threatening electric shock!

Warning labels

Warning labels are included in the package. Stick a label in your language over or next to the language label 

on the product.

Operation

•  Insert the power plug into a properly earthed mains socket e.g. wall socket.
•  Connect up to 6x consumers to the power strip.
•  The 2x sockets located above the 

↑Permanent↑

 marking are always on when the strip is connected to 

the power supply. 

• 

The 4x sockets located below the ↓

ON OFF↓

 marking are controlled by the foot switch and can all be 

switched ON/OFF at the same time.

Care and cleaning

  Before  cleaning  first  disconnect  the  socket  strip  from  the  power  supply  then  unplug  any 

connected devices.

•  Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the 

case or cause the product to malfunction.

•  Use a dry, lint-free cloth to clean the product.
•  Dust can be easily removed using a soft, clean long-haired brush and a vacuum cleaner.

Disposal

  Electronic devices are recyclable waste and must not be disposed of in the household waste. At 

the end of its service life, dispose of the product according to the relevant statutory regulations.

 

You thus fulfil your statutory obligations and contribute to environmental protection.

Technical data

Rated voltage ..............................................................250 V/AC, 50 Hz
Rated current ...............................................................max. 16 A
Rated power ................................................................max. 3500 W
Number of sockets .......................................................6
Product material ..........................................................PC
Enhanced protection against accidental contact .........yes
Cable length ................................................................ Power strip: 1.4 m 

Foot switch: 1.5 m

Operating conditions .................................................... -10 to +50 °C, 10 - 90 % RH (non-condensing)
Storage conditions ....................................................... -10 to +50 °C, 10 - 90 % RH (non-condensing)
Dimensions (W x H x D) .............................................. Power strip: 340 x 55 x 42 mm 

Foot switch: 69 x 69 x 32 mm

Weight .........................................................................670 g

 Operating instructions

6-Way Socket with Foot Switch, White

Item no. 2267533

Intended use

The product is a 6-way socket strip with 2 permanent outlets and 4 switchable outlets.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in a bathroom) 

must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product for purposes 

other than those described above may damage the product. In addition, improper use can cause hazards 

such as a short circuit, fire or electric shock. Read the instructions carefully and store them in a safe place. If 

you pass the product on to a third party, please hand over these operating instructions as well.
This product complies with statutory, national and European regulations. All company and product names are 

trademarks of their respective owners. All rights reserved.

Package contents

•  6-way socket
•  Operating instructions

Up-to-date operating instructions  

Download the up-to-date operating instructions at www.conrad.com/downloads or scan 

the QR code shown. Follow the instructions on the website.

Explanation of symbols

  The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to 

an electric shock.

  The symbol with an exclamation mark in a triangle is used to highlight important information in 

these operating instructions. Always read this information carefully.

  The arrow symbol indicates special information and tips on how to use the product.

  The product must only be installed and used in dry, indoor locations. It must not become damp 

or wet, as this may cause a fatal electric shock!

Safety information

Read the operating instructions and safety information carefully. If you do not follow the 

safety information and information on proper handling in these operating instructions, 

we will assume no liability for any resulting personal injury or damage to property. Such 

cases will invalidate the warranty/guarantee.

a) Special safety

• Do not connect the product in series!
• Do not operate the device while covered.
• De-energised only when unplugged.
• Only use in dry rooms.

b) 

General information

•  The device is not a toy. Keep out of the reach of children and pets.
•  Do not leave packaging material lying around carelessly. It may become a dangerous 

plaything for children.

•  Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, 

moisture, flammable gases, vapours and solvents.

•  Do not place the product under any mechanical stress.
•  If it is no longer possible to operate the product safely, take it out of operation and protect it 

from any accidental use. Safe operation can no longer be guaranteed if the product:

 - is visibly damaged, 
 - is no longer working properly, 
 - has been stored for extended periods in poor ambient conditions or 
 - has been subjected to any serious transport-related stresses.

•  Please handle the product carefully. Jolts, impacts or a fall even from a low height may 

damage the product.

•  Always observe the safety information and operating instructions of any other devices which 

are connected to the product.

•  Consult a technician if you are not sure how to use or connect the product, or if you have 

concerns about safety.

• 

Maintenance, modifications and repairs must be carried out by a technician or a specialist 

repair centre.

•  If you have any questions that are not answered in these operating instructions, please 

contact our technical customer service or other professionals.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). 

All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in 

electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is 

prohibited. This publication reflects the technical status at the time of printing.

Copyright 2020 by Conrad Electronic SE. 

*2267533_v2_1120_02_dh_m_en

Reviews: