16
Multiple user transponders with consecutive transponder numbers are saved at a time
This option enables you to save multiple transponders with consecutive transponder numbers at the same
time.
Since the memory cell numbers are also consecutive, transponders can be assigned to them; moreover,
it is possible to delete an individual transponder that is defective or lost via the memory cell number. How-
ever, you should first create a list of transponder numbers and memory cell numbers.
• Enable the programming mode as described in section 8. a); the LED starts to flash red.
•
Enter the programming code to pair the transponders. The yellow LED will then light up.
•
Enter the memory cell number (1 to 2000) from which multiple transponders should be saved at a time. You do not
need to enter leading zeros. Example: = save transponders from memory cell 200
•
Press the
button to confirm the memory cell number.
When the memory cell number is already occupied, the access system emits three brief beeps and the LED
flashes red.
•
Enter the number of transponders you want to save at the same time. Example:
= 30 transponders with
consecutive numbers are to be saved
•
Press the
button to confirm the number of transponders.
Make sure that there are enough memory cells available from the entered memory cell number to accom-
modate all the transponders to be saved. For example, it is not possible to save 200 transponders starting
from memory cell 1900 since the access system has a total of only 2000 memory cells. Should that be the
case, the access system will emit three brief beeps and the LED will flash red.
• Enter the number of the first transponder (it should consist of 8 or 10 digits).
•
Press the
button to confirm the transponder number.
The access system will then save the selected user transponder in the memory cell. The whole procedure
lasts up to 3 minutes depending on the number of transponders.
•
Press the
button to exit the pairing mode. The LED flashes red again, which means that you can continue pro
-
gramming or exit the programming mode with the button.
Summary of Contents for 2380477
Page 1: ...Operating Instructions RFID access system Item no 2380477 ...
Page 29: ...29 ...
Page 30: ...30 ...
Page 31: ...31 ...