Exercise particular caution when children are present. Children do not understand the haz-
ards associated with the incorrect use of electrical devices. There is a risk of fatal electric
shock!
Never overload the product. Observe the connected load in the chapter “Technical Data”.
Do not operate the product when covered! Connecting power consumers causes the gar-
den power outlet to heat up, which could cause overheating or even fire if the product is
covered.
Never direct the water jet of a garden hose at the product.
The nameplate must not be removed.
Always observe the safety information and operating instructions of any other devices
which are connected to the product.
Consult a technician if you are not sure how to use or connect the product, or if you have
safety concerns.
Maintenance, modifications and repairs must be carried out by a technician or a specialist
repair centre.
If you have questions that remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
6 Electrical installation
WARNING!
Safety hazard!
The product should only be installed and connected by people with relevant
electrical knowledge and experience!
If it is not installed properly, you risk:
your own life;
the life of the user of the electrical device;
severe damage to property, e.g. by fire;
personal liability for injury and property damage.
Always consult an electrician!
Technical knowledge required to perform the installation:
The following specialist knowledge is required for installation in particular:
The “Five Safety Rules”: Disconnect from the mains; protect against
accidental switch-on; ensure there is no voltage; earth and short-circuit;
cover or protect adjacent live parts.
Use of suitable tools, measuring devices and personal protective
equipment, where necessary.
Analysis of measurement results.
Use of electrical installation materials to meet the requirements for safe
disconnection from the power supply.
IP protection ratings.
Installation of electrical installation materials.
Type of power supply (TN system, IT system, TT system) and the
corresponding connection criteria (classic earthing, protective earthing,
necessary additional measures etc.). If you lack knowledge in one of the
above-mentioned areas, do not perform any assembly and connection
work yourself and have it done by a specialist.
We recommend using an additional RCD protective device if the product will be
used outdoors. Such a device is a must in some regions. Observe the local instal-
lation regulations!
Operating instructions
Garden power outlet, 2 sockets, stainless steel
Item no. 2489874
Garden power outlet, 2 sockets, stainless steel anthracite
Item no. 2489875
1 Intended use
The product has 2 sockets with covers and serves to connect power consumers. The product is
intended for both indoor and outdoor use. The total power consumption of all power consumers
connected to the product must not exceed 3680 W.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. Using
the product for purposes other than those described above may damage the product. In addi-
tion, improper use can cause hazards such as a short circuit, fire or electric shock. Read the
operating instructions carefully and store them in a safe place. Only make this product available
to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and prod-
uct names contained herein are trademarks of their respective owners. All rights reserved.
2 Delivery content
Stainless steel garden power outlet
Hex wrench
4x Screws, 4x Dowels
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code
shown. Follow the instructions on the website.
4 Symbols in this document
This symbol warns of hazards that can lead to personal injury. Read the information
carefully.
This symbol warns of a dangerous voltage that can lead to injuries due to electric
shock. Read the information carefully.
5 Safety information
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
The assembly and connection to the power supply network must be carried out by
an authorised specialist.
This product is not a toy. Keep it out of the reach of children and pets.
Any damage caused by failure to observe these operating instructions will void the warranty!
We shall not be liable for any consequential damage.
Do not leave packaging material lying around carelessly. It may become a dangerous play-
thing for children.
Should you have any questions or concerns after reading this document, please contact
our technical support or a professional technician.
Please handle the product carefully. Impact, shocks or a fall even from a low height can
damage the product.
Never unplug the mains plug by pulling on the cable. Always use the grips on the plug.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
If it is no longer possible to operate the product safely, stop using it and prevent unauthor-
ised use. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stress.
Please handle the product carefully. Impact, shocks or a fall even from a low height can
damage the product.
Never unplug the mains plug by pulling on the cable. Always use the grips on the plug.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
Ensure there are no electrical wires or pipes that could be damaged while drilling holes on
the mounting surface and installing fasteners.
Inadvertently drilling through electric cables can cause life-threatening danger of an electric
shock!
Never insert or unplug the mains plug when your hands are wet.
Plugs must not be cascaded!
