4
7 Wiring (Item no. 2525887, 2574213)
Requirements
The mains supply to which you will wire the product must meet the following conditions:
■
The mains supply includes a light switch. The light switch will be used to switch the
product on and off.
■
The mains supply is protected by an RCD protective switch.
Wiring
1. Disconnect the power supply.
2. Wire the mains lead. Observe the wire colour coding:
- Blue: Neutral (N)
- Brown: Single phase (L)
- Green-yellow: Protective earth (PE)
8 Cleaning
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Let the product cool down to ambient temperature.
3. Clean the product with a dry, fibre-free cloth.
9 Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed of
as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-
back of waste. Conrad provides the following return options
free of charge
(more details on
our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points
set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply
in countries outside of Germany.
10 Technical data
Item No.
2525889
2525885
2525886
Input voltage
220 – 240 V/AC
Power consumption
20 W
30 W
50 W
Protection class
I
Ingress protection
IP65
Housing material
Die-cast aluminium
LED
28
Not replaceable
42
Not replaceable
70
Not replaceable
Dimmable
No
Colour temperature
3000 K
Luminous flux
1800 lm
2350 lm
4600 lm
Colour rendering index
Ra > 80
View angle
120°
Operating temperature
-35 to +45 °C
Storage temperature
-40 to +45 °C
Dimensions (W x H x D)
121 x 44 x 102 mm 156 x 44 x 115 mm 190 x 44 x 128 mm
Weight
230 g
340 g
485 g
Item No.
2525887
2574213
Input voltage
220 – 240 V/AC
Power consumption
100 W
200 W
Protection class
I
Ingress protection
IP65
Housing material
Die-cast aluminium
LED
112
Not replaceable
224
Not replaceable
Dimmable
No
Colour temperature
3000 K
Luminous flux
8500 lm
17000 lm
Colour rendering index
Ra > 80
View angle
120°
Cable type
H05RN-F 3G1.0mm
2
Cable length
20 cm
Operating temperature
-35 to +45 °C
Storage temperature
-40 to +45 °C
Dimensions (W x H x D)
210 x 34.5 x 163.5 mm
385 x 48 x 275 mm
Weight
680 g
2260 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2525889_2525885_2525886_2525887_2574213_V2_0922_jh_mh_en
18014399050091147-2
I3/O2
en
