2
Operating Instructions
USB Christmas tree with RGB lights
Item no: 2361029
1 Intended use
Use the product to decorate interior spaces. Do not use the product for lighting purposes; the
product is not suitable for illuminating working and living areas in your home.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Product
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR
code shown. Follow the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in this document. Always read this information carefully.
Read the operating instructions carefully.
This product must only be used in dry, enclosed indoor areas. It must not be-
come damp or wet.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
5.2 Handling
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. Safe operation can no longer be guaranteed if the
product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
■
Consult an expert when in doubt about the operation, safety or connection of the appli-
ance.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Connected devices
■
Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
5.5 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
6 Switching on/off
After setting up the product you can switch it on.
Important:
– Never operate the product while it is in the packaging or rolled up.
– Do not cover the product while it is in use or cooling down.
1. Connect the USB plug to a USB power source (5 V/DC, min. 500 mA) to establish the
power supply.
à
The lights go on.
2. To turn the product off, disconnect the USB plug.
7 Cleaning and care
NOTICE! Do not use aggressive cleaning agents, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
8 Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accord-
ance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
9 Technical data
Power supply ................................. 5 V/DC, min. 500 mA via USB
Light colour .................................... RGB
Colour temperature ....................... 2700 – 3000 K
LED life .......................................... 10000 h
Power cable length ........................ 1 m
Operating conditions ..................... 0 to +40°C, 0 - 90 % RH
Storage conditions ......................... 0 to +40°C, 0 - 90 % RH
Dimensions (W x H x D) ................ 75 x 110 x 75 mm
Weight ........................................... 56 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2361029_V1_0621_jh_mh_en
