• Handle the product with care; it can be damaged by impacts, blows or falls even
from a low height.
• If you have any questions that are not answered in this manual, please contact our
technical service or another specialist.
b) Connected Devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
c) Mains Cable
• Completely unwind the mains cable when using the power strip.
• Lay the cable such that nobody will trip over it.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges
or put under mechanical stress.
• Avoid excessive thermal stress on the mains cable from extreme heat or cold.
• Do not modify the mains cable. Otherwise the mains cable may be damaged.
A damaged mains cable can cause a deadly electric shock.
• Never use the product if the mains cable is damaged.
• Do not touch the mains cable if it is damaged. First, power down the respective
mains socket (e.g. via the respective circuit breaker) and then carefully pull the
mains plug from the mains socket.
• A damaged mains cable may only be replaced by the manufacturer, a workshop
commissioned by the manufacturer or a similarly qualified person, so as to prevent
any danger.
d) Operating Location
• The product may only be used in dry interiors; it must not get damp or wet! Never
position the product in direct vicinity of a bathtub, shower, bathroom, swimming
pool, or similar. Lethal hazard due to electric shock!
• The product must not be exposed to extremes of temperature, direct sunlight or
strong vibrations. Keep the product away from strong magnetic fields generated
by machines, electric motors or loudspeakers.
• Do not operate the device in environments where there are high levels of dust,
flammable gases, vapours or solvents. There is a danger of fire and explosion!
• The device can warm up during use. Make sure not to place it on sensitive
surfaces.
• Do not use this product in hospitals or medical institutions. Radio waves may
interfere with medical equipment. The same may also apply to other areas.
e) Handling and Use
• Never plug in, unplug or operate the product when your hands are damp or wet.
There is a risk of a life-threatening electric shock! The same applies for the load
that is plugged into the socket of the product.
• Never connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g. during transport). The
condensation that forms might destroy the device. Moreover, there is danger
of electric shock! Allow the product to reach room temperature. Wait until the
condensation has evaporated. This might take several hours. Only then the
product may be plugged into the mains socket and put into use.
• Always use the gripping surface to pull a mains plug out of the product. Never
unplug a mains plug from a mains socket by pulling the cable.
• Never overload the product. Note the maximum permissible connected load in the
chapter “Technical Data”.
• Do not connect in series! This can lead to an overload of the product! There is
a risk of fire!
• Do not operate while covered! At higher connected loads, the product becomes
warm, which can lead to overheating and potentially a fire if covered!
• Disconnect the product from the mains socket in thunderstorms for reasons of
safety.
• Voltage-free only if unplugged
• Do not use the product if it is damaged. There is a risk of a life-threatening electric
shock! In this case, dispose of the product in an environmentally correct manner.
Safe operation can no longer be assumed if:
- the product shows visible signs of damage
- the product does not work at all or works poorly (leaking smoke or a smell of
burning, audible cracking noises, discolouration to the product or the adjacent
surfaces)
- the product was stored under unfavourable conditions
- it was exposed to heavy loads during transport
• Never pour any liquids above or next to the product. You run the risk of causing
a fire or a fatal electric shock. If any liquid has still managed to enter the device,
immediately switch off the power supply to the mains socket at which the product
is connected (turn off the fuse/circuit breaker/residual current operated circuit
breaker of the associated circuit). Only then can you unplug the product from the
mains socket and contact a specialist. Do not use the product any longer.
• Always pull the product out of the mains socket (e.g. wall socket) before cleaning it
or when the device will not be in use for a long time (e.g. for storage).
• Use the product only in a temperate climate, never in a tropical climate.
Operating Instructions
SY-PS-400 Smart Wi-Fi Socket Strip
with 4 USB Charging Ports
Item No. 2226163
Intended Use
The product acts as a power socket and is equipped with a push button that turns the power
supply to connected loads on and off. The product is equipped with 3 power sockets, 4 USB-A
charging ports and over current (surge) protection.
An accompanying app controls the product (master on/off, individual socket on/off, 4 x USB-A
on/off, countdown, schedule, power meter, and voice control).
The product is intended only for the connection to a standard power socket with earth contact.
Refer to the technical data section to learn more about the maximum permissible loads.
Warning labels in different languages are included in the package. Stick the language label in
your language over or next to the language label on the product.
The product is only designed for indoor use. Keep away from water and high-humidity sources
and the areas where these conditions occur (e.g. bathroom).
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Wi-Fi power strip
• Warning labels
• Operating instructions
Up-to-Date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Application
Compatible Android and iOS apps are
available from their respective app stores.
Search for “Smart Life - Smart Living” and
download the application.
App operating instructions are available
from the URL listed in chapter “Up-to-Date
operating instructions”.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
•
The unauthorized conversion and/or modification of the product is not allowed for
safety and approval reasons. Do not open/disassemble!
• The product is designed in accordance with protection class I. Only a standard
grounding mains socket of the public supply grid (a wall socket, for example) may
be used as a power source.
• The mains socket to which the product is connected must be easily accessible.
• The product is not a toy and should be kept out of the reach of children. Position
the product so it is out of the reach of children.
• The product is equipped with a child safety lock. An integrated mechanism will
release the holes of the receptacle only, if the two prongs of a power plug are
inserted into the two holes at once. Nevertheless, take special caution when children
are around. Children cannot recognize the danger arising from the incorrect use of
electrical devices. There is a risk of a life-threatening electric shock!
• Do not leave the packaging material lying around carelessly as it may be a danger
to children.
- Powered by Tuya
The product is compatible with the
Conrad Connect
IoT platform at
www.conradconnect.com
