Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU.
United Kingdom
Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901
e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com
COPYRIGHT 2018 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED. ALL PRODUCTS SUBJECT TO AVAILABILITY. E&OE.
Specialist Tool Solutions
Preparation & Operating Instructions
Before
first use:
Please note that when you take the machine out of the
box, the machine will be blanked off (to remove this plug, use the tool
provided) to ensure that no fluid has been lost during transit. On first use,
a small amount of electrolyte may be discharged from the fitting when
the blanking plug is removed – this should be captured and disposed of
as a mild alkali solution. The hose can then be plugged into the machine.
1.
Start
the vehicle to be treated and idle the car until the engine
reaches operational temperature. Make sure all engine loads (e.g.
lights, air conditioning etc.) have been switched off.
2.
Park
the vehicle either outside,
or with the exhaust positioned
towards the outside of a
workshop, and make sure the
area is well-ventilated. This is
to ensure that any released
exhaust emissions do not
enter the building, or use
exhaust extraction.
3.
Turn off the car before
connecting the cleaning
machine to the battery. Place
the machine on dry, level
ground and, if using outdoors,
ensure it is protected from any
rainfall. Ensure the power
switch on the machine is set
to the ‘off’ position.