5
INSTALLATION
8 UNPACKING THE PRODUCT
Package content
1
2
3
1 Solar Station
In a plastic bag, the following material is also supplied:
2 Instruction manual
3 Logo.
b
The instruction manual is an integral part of the boiler.
Once located, read it thoroughly and keep it safe.
9 INSTALLATION PREMISES
b
When installing the boiler, allow sufficient space
around it to access all safety and control devices and
to permit easy maintenance.
9 1 Recommended minimum
distances
Recommended distances for assembly and maintenance
are 300 mm on each side (including expansion tank).
Put the solar station at a proper hight to allow thermometer
and pressure gauge reading.
≥ 0,3 m
≥ 0,3 m
≥ 0,3 m
Installation
10 ASSEMBLY
- Remove the front insulation (1)
- Mark mounting points (F) on the wall and drill
- Insert blocks (not supplied)
F
F
70mm
1
12
3
0
55mm
b
Use suitable wall-mounting bolts and blocks.
- Set solar station at the centre
- Fasten the solar station with the fixing bracket (4), the
screws (2) and the washers (3) not supplied.
4
2
3
3
