90
E
-menu Foot Pedal, Switch 1 and 2 Setting
Single Function
e attribution of a single function to
the external contact
Function
Allows the attribution of multiple functions
t. It is possible to
Activates the "Preset" value
Initializes Min/Max…
o
ctivates the downwards movement of the probes (by the unit D110).
D110 Lifting
Activates the upwards movement of the prob
D110 Toggle
Activates the upwards/downwards movement of the probes (by the unit D110).
Hold Enable
Activates the inhibition of values. The values displayed are locked; the movement of
the probes has no effect on the displayed values anymore.
Hold Disable
Deactivates the inhibition of values.
ause Enable
ctivates the "Pause" function (see also page 97)
ause Disable
eactivates the "Pause" function (see also page 97)
Pause Toggle
Activates / deactivates the "Pause" function (see also page 97)
Print – Seq1-8
Sends the selected sequence to Excel / Notepad. The sequences may be configured
in menu "4.1.3 Sub-menu Sequences Configuration"
Change Digital Output Setting
Two modes are possible in the configuration menu for the Digital Output:
1 = Master Tol & D110,
2 = Channel Tol,
By activating the external contact, this configuration changes from one to the other
function. See chapter 4.1.5
4.1.4
Sub
Allows th
Combined
to the external contac
combine up to 4 functions.
No Function
No function
Activates the data transfer
Preset
Clear
D
A
110 L wering
es (by the unit D110).
Hold Toggle
Activates / deactivates the inhibition of the values.
P
A
P
D
