2.2. Installation Diagram
Step1 Install Mortise
Step2 Install Screws Casing and Water Rubber
Plate
vStep3 Install Front Panel
Step4
Fixed Front Panel and Water Rubber
Plate
Step5 Connecting Front and Back Panels
Step6 Fixed Back Panel
Step7 Install Batteries
Step8 Cover the battery box
USING THE CORRECT
DRILLING TEMPLATE
Note: Spindle may need
to be cut down for narrow
doors. This should be
done using a hacksaw
ensuring enough length
to engage correctly into
deadbolt hub.
www.sylvan.co.nz
IMPORTANT
IMPORTANT
SPINDLE MUST
BE INSTALLED
HORIZONTAL
IMPORTANT
DEADBOLT MUST
BE RETRACTED
DURING INSTALL