- 12 -
EN
9J27
3
Select the month
Press the PLAY/
K
or STOP/
L
but-
ton until your desired month
appears. (Example: May
→
05)
Then, press the F.FWD/
B
button.
4
Select the day
Press the PLAY/
K
or STOP/
L
but-
ton until your desired day appears.
(Example: 6th
→
06)
Then, press the F.FWD/
B
button.
5
Select the year
Press the PLAY/
K
or STOP/
L
but-
ton until your desired year appears.
(Example: 2003)
Then, press the F.FWD/
B
button.
6
Select the hour
Press the PLAY/
K
or STOP/
L
but-
ton until your desired hour appears.
(Example: 5, PM)
Then, press the F.FWD/
B
button.
7
Select the minute
Press the PLAY/
K
or STOP/
L
but-
ton until the desired minute
appears. (Example: 40)
8
Start the clock
Press the MENU button on the
remote control.
Although seconds are not dis-
played, they begin counting from
00 when you press the MENU but-
ton on the remote control. Use this feature to syn-
chronize the clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 3 seconds, you may have to
reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1)Follow steps [1] and [2].
2)Select where you want to change using the
F.FWD/
B
or REW/
s
button.
3)Enter correct numbers using the PLAY/
K
or
STOP/
L
button.
4)Press the MENU button on the remote control to
start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on
your cable system, select “AUTO CLOCK” and
press the F.FWD/
B
or REW/
s
button to turn [OFF]
this function. Then you can manually adjust the
clock.
AUTOMATIC CLOCK SETTING
Make sure ...
•
The TV/VCR is turned on.
•
Confirm the TV/VCR is receiving a RF (Radio
Frequency) signal from either an antenna or cable
system connection using the ANT IN jack on the
rear of the TV/VCR.
NOTE:
•
If a cable converter box is being used, make sure it
is powered on.
•
You must use the TV/VCR remote control to per-
form the clock setting procedure.
1
Select “SETTING CLOCK”
Press the MENU button on the
remote control.
Press the PLAY/
K
or STOP/
L
but-
ton to select “SETTING CLOCK”.
Press the F.FWD/
B
button to enter
“SETTING CLOCK” menu.
2
Set “AUTO CLOCK” to [ON]
Press the F.FWD/
B
button until
AUTO CLOCK [ON] appears.
3
Begin “AUTO CLOCK CH SEARCH”
Press the STOP/
L
button to select
“AUTO CLOCK CH SEARCH”.
Press the F.FWD/
B
button.
•
The TV/VCR is now searching
for the station which contain the
auto clock set signal. The search
for a signal may take up to 20
seconds per channel.
•
“_ _” appears at the lower left of
the screen when the search has
ended.
•
Auto Clock station- write down
the number(s) that appear on the
screen. These are the auto clock
station(s) in your area. See item
4 below.
– MANUAL CLOCK SET –
MONTH DAY
YEAR
0 5 / 0 6
TUE
2 0 0 3
HOUR
MINUTE
0 5 : – –
PM
– MANUAL CLOCK SET –
MONTH DAY
YEAR
0 5 / 0 6
TUE
2 0 0 3
HOUR
MINUTE
0 5 : 4 0
PM
5:40 PM
– MANUAL CLOCK SET –
MONTH DAY
YEAR
0 5 / 0 6
TUE
2 0 0 3
HOUR
MINUTE
– – : – –
– –
– MANUAL CLOCK SET –
MONTH DAY
YEAR
0 5 / – –
– – – – – – –
HOUR
MINUTE
– – : – –
– –
– MANUAL CLOCK SET –
MONTH DAY
YEAR
0 5 / 0 6
– – – – – – –
HOUR
MINUTE
– – : – –
– –
– SETTING CLOCK –
B
AUTO CLOCK
[ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH
[ 02 ]
MANUAL CLOCK SET
D.S.T.
[OFF]
– SETTING CLOCK –
AUTO CLOCK
[ON]
B
AUTO CLOCK CH SEARCH
AUTO CLOCK CH
[ 02 ]
MANUAL CLOCK SET
D.S.T.
[OFF]
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
– AUTO CLOCK CH SEARCH –
08 10 13
_ _
