- 10 -
EN
USING FRONT A/V INPUT JACKS
When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.
Connect the Audio/Video output jacks of another source to the AUDIO and VIDEO jacks
of this unit.
Then press [CHANNEL
K
K
/
L
L
] until “AUX” appears on the screen.
L
K
L
K
E
D
B
C
A
VIDEO
AUDIO
POWER
VOLUME
CHANNEL
STOP/EJECT
REW
PLAY
F.FWD
REC/OTR
EARPHONE
VIDEO
AUDIO
ex.
VCR or video camera, etc.
[Front of the unit]
To the Audio output jack
To the Video output jack
AUX
(OUT)
(IN)
(OUT)
(IN)
TV OPERATION AND SETTINGS
WATCHING A TV PROGRAM
1
Plug in the unit power cord
Plug the unit power cord into a standard
AC outlet.
NOTE:
•
If any digits appear in the corner of the
screen, hit
[POWER]
without unplug-
ging the power cord.
2
Turn on the unit
Hit
[POWER]
to turn on the unit.
3
Select the channel number
Press
[CHANNEL
K
/
L
]
or
the Number buttons
to
select your desired channel number.
Note for using the Number buttons:
¡
You must precede single-digit channel numbers
with a zero (for example: 02, 03, 04 and so on).
¡
When selecting cable channels which are higher
than 99, hit
[+100]
first, then press the last two
digits. (Example: to select channel 125, first hit
[+100]
then hit
[2]
and
[5]
.)
4
Adjust sound
Press
[VOLUME
X
X
/
Y
Y
]
to adjust
the volume.
Hit
[MUTE]
to instantly mute the
sound.
Hit it again to restore the previous sound level.
TO WATCH CABLE OR SATELLITE
CHANNEL
•
If the unit is connected to a cable box or satellite
box, press
[CHANNEL
K
/
L
]
to select CH3 or
CH4 according to the output channel setting of the
device and select desired channel on that device.
TO WATCH EXTERNAL INPUT
•
When an external equipment is connected to the
front AUDIO/VIDEO input jacks,
press [CHAN-
NEL
K
K
/
L
L
] repeatedly until “AUX” appears on
the screen.
VOLUME
20
C C C C C
C C C C C C C
Audio cable
(commercially available)
Video cable (commercially available)
