background image

- 3 -

EN

13.Outdoor Antenna grounding - 

If an outside antenna or

cable system is connected to the unit, be sure the antenna
or cable system is grounded so as to provide some protec-
tion against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA
No. 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)

14.Lightning - 

For added protection for this unit receiver dur-

ing a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the unit due to lightning and power-line
surges.

15.Power Lines - 

An outside antenna system should not be

located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.

16.Overloading - 

Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry - 

Never push objects of any

kind into this unit through openings as they may touch dan-
gerous voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind on
the unit.

18.Servicing - 

Do not attempt to service this unit yourself as

opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.

19.Damage Requiring Service - 

Unplug this unit from the

wall outlet and refer servicing to qualified service person-
nel under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the

unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the oper-

ating instructions. Adjust only those controls that are cov-
ered by the operating instructions, as improper adjustment
of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the unit to its normal operation.

e. If the unit has been dropped or damaged in any way.

f. When the unit exhibits a distinct change in performance,

this indicates a need for service.

20.Replacement Parts - 

When replacement parts are required,

be sure the service technician has used replacement parts
specified by the manufacturer that have the same character-
istics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other haz-
ards.

21.Safety Check - 

Upon completion of any service or repairs

to this unit, ask the service technician to perform routine
safety checks to determine that the unit is in proper operat-
ing condition.

22.Heat - 

This unit product should be situated away from heat

sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.

G RO UND  CL AM PS

NE C -  NA TI O NAL  EL E CTRI CAL  CO DE

EXAMPLE OF ANTENNA GROUNDING AS PER

NA TIONA L  ELECT RIC AL  CODE

S 2 8 9 8 A

W I R E

DI S CHA RG E  UN I T
(NEC  SE CTI ON  8 10 -2 0)

G RO UNDI NG   CO NDUCT ORS
(NEC SE CTI ON 8 10 -2 1)

E L E C TR O DE   S Y S T E M
(NEC A RT  2 50 ,  P ART H)

S E RV I CE
E Q U I P M E N T

C L A M P

AN TE NN A

L E A D  I N

A NTEN NA

P OWE R S E RVI C E G RO UNDI NG

GROUN D

E L E CT RI C

F IGUR E A

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

Summary of Contents for 6313CEY

































Reviews: