background image

- 31 -

EN

0C28

5

Press the SETUP button.

The setup mode will be canceled and the ordinary
screen will appear.

NOTE:

If the number buttons are used in steps 2 to 4, the
settings are immediately selected. (You do not need
to press the ENTER button.)

This unit employs TruSurround system 
                                           of SRS Labs, Inc. as the 
VIRTUAL 3D technology.

TruSurround and the             symbol are trademarks of 
SRS Labs, Inc. in the United States and selected 
foreign countries.
TruSurround technology is incorporated under license 
from SRS Labs, Inc.

1

Press the SETUP button.

The setup screen will appear.

2

Press the 

K

K

/

L

L

or number buttons to select

LOCK, and then press the ENTER button.

3

Press the number buttons to enter the 4-digit
password, and then press the ENTER button.

When doing this for the first time, enter any 4 dig-
its. That number will be used as the password from
the second time onward.

By entering the password, you
can then change the control level
and password settings.

4

Press the 

K

K

/

L

L

or number buttons to select an

item, and then press the ENTER button.

When LEVEL is selected

Press the 

K

/

L

buttons to select an item from

LEVEL 1 to LEVEL 8 or NONE, and then press
the ENTER button.

When CHANGE PASSWORD is selected

The password entry screen will be displayed and
the password which has already been set will be
cleared. The four digits entered in step 3 will then
be set as the new password.

5

The setup screen will appear.

PARENTAL LOCK

                SETUP

1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS

Enter                        /                Exit

• 

To set the control level to 1 to 8 or none.

• 

To cancel the current password and set a 

   new one on the same screen.

           SETUP/LOCK

PASSWORD         [ _ _ _ _ ]

1. LEVEL

[LEVEL8]

2. CHANGE PASSWORD

Enter,                  Back

           SETUP/LOCK

PASSWORD

[            ]

1. LEVEL

[LEVEL8]

2. CHANGE PASSWORD

Enter,                  Back

_ _ _ _

           SETUP/LOCK
        PARENTAL LOCK

NONE
LEVEL 8  [PLAY ALL]
LEVEL 7  [NC-17]
LEVEL 6  [R]
LEVEL 5
LEVEL 4  [PG-13]
LEVEL 3  [PG]
LEVEL 2
LEVEL 1  [G]

Enter

Summary of Contents for 6513DA













































Reviews: