Sylvania 6720FDG Owner'S Manual Download

Page: 14 / 44

STEREO

WHEN RECEIVING AN MTS BROADCAST

Press

[TV/VCR Audio]

repeatedly to select a sound

mode when you watch or record a TV program.

• The mode changes according to

the broadcast among "STEREO",

"SAP" and "MONO" every time

you press the button.

NOTES:

• The initial setting is "STEREO". The unit records auto-

matically MTS broadcasts in Hi-Fi stereo sound unless
you select "SAP" beforehand.

• If you select "SAP" when second audio is not available,

the unit will record in normal audio.

• This setting returns to the initial value when you turn off

the unit or unplug the power cord.

N SCREEN DISPLAY

MTS (Multi-channel Television Sound) SYSTEM

MTS allows for reception of sound other than the main audio program. You can listen or record
monaural audio sound, stereo sound or Secondary Audio Program (SAP).

WHEN PLAYING CASSETTES

Press

[TV/VCR Audio]

repeatedly to select "HIFI"

or "MONO".

• This setting is saved until the cassette is ejected.

NOTE:

• The initial setting is "HIFI". When you play non-HIFI tapes,

the unit will play only in the monaural mode even if the
setting is "HIFI".

WHEN IN THE EXTERNAL INPUT ("AUX") MODE

Any output mode setting does not affect the audio
output, and the current audio output mode does not
appear on the TV screen.

STATUS DISPLAY

TV/VCR

On screen display examples are shown
below.

1. VCR status

Displays the current VCR motion:
PLAY / STOP / REC / OTR / PAUSE / FF / REW

2. VCR sound mode status

(during playback)

Displays "HIFI" when the tape is recorded in
Hi-Fi stereo mode.

3. Tape speed

(during recording)

Displays the tape speed: SP / SLP

4. Clock

5. Channel number

(in TV mode)

Displays the current channel number.
"AUX" is displayed in external input mode.

6. MTS status

(in TV mode)

Displays the current sound status of the broad-
cast: STEREO / SAP

7. Tape counter

(during playback or recording)

Shows the elapsed recording or playback time.
(Not available for a blank tape or blank portions
on the tape.) You can reset the counter by press-
ing

[CLEAR]

PLAY

12:00AM

HIFI

CH 123

STEREO/SAP

SP COUNT 0:00:00

CHECKING THE STATUS

While receiving a broadcast or playing a
VHS tape, you can check the status dis-
played on the screen by pressing

[DISPLAY]

. You

can also check the status of the preset MTS (Multi-
Channel Television sound). The display will change
as shown below each time you press

[DISPLAY]

WHEN THE CLOSED CAPTION IS OFF

The display switches among VCR counter and clock.

WHEN THE CLOSED CAPTION IS ON

The display switches among VCR counter and clock.

STOP

COUNT 0:12:34

5:40PM

CH2

Display OFF

CLOCK/COUNTER

display

*The display will disappear
after 5 seconds

STOP

COUNT 0:12:34

5:40PM

CH2

5:40PM

CH2

After 5 seconds

Display OFF

COUNTER display

CLOCK display

TV/VCR

TV/VCR SECTION

T1200UA_EN.QX3 06.2.6 11:16 AM Page 14

Summary of Contents for 6720FDG













































Search results

Summary of Contents for 6720FDG

Reviews:

Related manuals for 6720FDG

Brands by name

Popular brands

Sylvania 6720FDG, Owner'S Manual

Search results

Summary of Contents for 6720FDG

Reviews:

Related manuals for 6720FDG

Brands by name

Popular brands