12
EN
I
NITIAL SETTING
Auto Channel Scan
If you switch wires (e.g., between antenna and CATV) or if you move the
unit to a diff erent area after the initial setting, or if you recover the DTV
channel you deleted, you will need to perform auto channel scan.
Before you begin:
Make sure if the unit is connected to antenna or cable.
1
Press
[SET-UP]
to display the main menu.
2
Use
[Cursor
K
/
L
]
to select “CHANNEL SETUP”,
then press
[ENTER]
.
e.g.) digital TV mode
or
--- TV SETUP ---
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
DTV SETUP
3
Use
[Cursor
K
/
L
]
to select your desired preset
type, then press
[ENTER]
.
e.g.) digital TV mode
or
--- CHANNEL SETUP ---
ADD/DELETE (DTV)
AUTO PRESET CH (DTV)
AUTO PRESET CH (TV/DTV)
AUTO PRESET CH (CATV)
! CATV takes approx. 50min.
• When aerial antenna is connected, select
“AUTO PRESET CH (TV)”, “AUTO PRESET CH (DTV)” or
“AUTO PRESET CH (TV/DTV)”.
• When connected to CATV, select
“AUTO PRESET CH (CATV)”.
• Scanning and memorizing the channels automatically
start.
e.g.) digital TV mode
D25
AUTO PRESET CH(DTV)
• When the scanning and memorizing are completed,
the lowest memorized channel will be displayed.
• When you selected “AUTO PRESET CH (TV/DTV)”, the
lowest memorized analog channel will be displayed
when the scanning and memorizing are completed.
If there is no analog channel, the lowest memorized
digital channel will be displayed.
5
Note:
• If you connect the cable system directly, contact the CATV
installer.
• If you press
[POWER
y
]
or
[SET-UP]
during
“AUTO PRESET CH”, the setting will be canceled.
• When no channel can be received by “AUTO PRESET CH”,
“NO TV SIGNALS” is displayed on the TV screen.
• Channel setting will be saved even if the power fails.
• If you have Spanish or French menus and need English,
press
[SET-UP]
. Use
[Cursor
K
/
L
]
to select “IDIOMA” or
“LANGAGE”. Press
[ENTER]
to select “ENGLISH”.
Press
[SET-UP]
to remove the main menu.
• With regard only to the digital channel, even after the scan-
ning is complete if you unplug the AC power cord before
turning off the unit by pressing
[POWER
y
]
, the channel
setting may be lost.
Language Selection
You can choose English, Spanish, or French as your on-screen language.
1
Press
[SET-UP]
to display the main menu.
2
Use
[Cursor
K
/
L
]
to select “LANGUAGE”,
then press
[ENTER]
repeatedly to change the setting.
e.g.) digital TV mode
or
--- TV SETUP ---
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
DTV SETUP
ENGLISH
ESPAÑOL
FRANÇAIS
3
Press
[SET-UP]
to exit.
5
P7402UT_CD130SL8_EN_v2.indd 12
P7402UT_CD130SL8_EN_v2.indd 12
2008/08/28 16:40:45
2008/08/28 16:40:45
