Sylvania D6313CB, Owner'S Manual

- 21 -

EN

0B19

Make sure ...

•

TV/VCR power must be turned on.

•

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to
the point at which you want to begin recording.)

NOTE: This unit will ONLY record and view the same channel.

You can ONLY watch the same TV program that is
being recorded.

1

Select the channel to be recorded

Press the number buttons on the
remote control or the CHANNEL

K

or 

L

button.

Remember: If the TV/VCR is con-
nected to a cable box or satellite
box, the TV/VCR must be on CH3
or CH4, then the channel to be recorded must be
selected on the cable box or satellite box.

2

Select the tape speed

Press the SPEED button to select
the desired tape speed (SP/ SLP).

3

Begin recording

Press the RECORD button.

4

Stop recording

Press the STOP button when recording is completed.

NORMAL RECORDING

Press the PAUSE/STILL button to
temporarily stop recording. 
Press the PAUSE/STILL or
RECORD button to resume record-
ing.
NOTES:

•

After five minutes, the TV/VCR will automatically
switch to the Recording mode to prevent tape dam-
age.

•

If “CLOSED CAPTION (ON)” is selected, the On-
Screen Display will appear for 5 seconds, then dis-
appear.

SKIPPING UNWANTED 

SCENES DURING RECORDING

CH 10

SP

REC

SP

PAUSE

SP

OTR (One Touch Recording)

This function enables you to set a recording length
simply by pressing the REC/OTR button on the
TV/VCR.

Make sure ...

•

TV/VCR power must be turned on.

•

Insert a cassette tape with its erase prevention tab
in place. (If necessary, rewind or fast forward the
tape to the point at which you want to begin
recording.)

NOTES:

•

This function CANNOT be done from the remote
control.

•

Recording starts immediately when the REC/OTR
button is pressed.

•

When the REC/OTR button is pressed 18 times, the
TV/VCR returns to the Normal Recording mode.

•

To stop the OTR operation, press the STOP button
on the TV/VCR or on the remote control.

•

To show the remaining time, press the DISPLAY
button on the remote control so that “OTR”
appears on the TV screen. (It will show up momen-
tarily then disappear.)

•

Recording stops when 0:00 is reached.

•

Please note that in the SLP mode maximum record-
ing time, assuming the tape is started at the begin-
ning, is 8 hours using T-160 (or 6 hours using T-
120).

•

If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode immediate-
ly, ejects the tape and turns itself off.

1

Select the channel to be recorded

Press the number buttons on the remote control or
the CHANNEL

K

or 

L

button.

Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be recorded is selected on
the cable box or satellite box.

2

Select the tape speed

Press the SPEED button to select the desired tape
speed (SP/ SLP).

 T5207.QX33  01.3.19 10:19 AM  Page 21