20
EN
O
PTIONAL SETTING
Main Menu
This section describes the overview of the main menu displayed when you
press
[SETUP]
. For more details, see the reference page for each item.
The main menu consists of the function setting items below.
Press
[SETUP]
.
PICTURE
You can adjust the picture quality.
Refer to “Picture Adjustment” on page 23.
SOUND
You can adjust the sound quality.
Refer to “Sound Adjustment” on page 24.
CHANNEL
• You can automatically scan the viewable channels.
Refer to “Autoscan” on page 20.
• You can skip the undesired channels when selecting
the channels using
[CH
K
/
L
]
.
Refer to “Channel List” on page 21.
• You can add the channels that were not scanned by
the autoscan.
Refer to “Manual Register” on page 21.
DETAIL
• You can change the display format for closed
caption, which displays the dialogue of a TV program
or other information across the TV screen.
Refer to “Closed Caption” on page 25.
• You can set the viewing limitations.
Refer to ‘‘Child Lock” on page 28.
• You can adjust the position, stability and clarity of the
PC screen.
Refer to “PC Settings” on page 32.
• You can select the energy saving mode.
Refer to “Energy Saving Mode” on page 33.
• When you adjust the desired “PICTURE” and
“SOUND” mode, you must switch the setting from
“Retail” to “Home”. Refer to “Location” on page 33.
• You can confirm the version of the software currently
used in this unit.
Refer to ”Current Software Info” on page 34.
LANGUAGE
You can change the language (English, Spanish,
French) displayed on the main menu.
Refer to “Language Selection” on page 22.
DVD
You can customize some functions for the disc
playback. Make sure the unit is in stop mode.
Refer to “DVD SETTING“ section on page 44.
Autoscan
If you switch wires (e.g., between antenna and CATV) or if you move the
unit to a different area after the initial setting, or if you restore the DTV
channel you deleted, you will need to perform autoscan.
Before you begin:
Make sure the unit is connected to antenna or cable.
1
Press
[SETUP]
to display the main menu.
2
Use
[Cursor
K
/
L
]
to select “CHANNEL”, then press
[ENTER]
.
3
Use
[Cursor
K
/
L
]
to select “Autoscan”, then press
[ENTER]
.
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
Use
[Cursor
K
/
L
]
to select an appropriate option, then
press
[ENTER]
.
Autoscan
Autoscan
Autoscan will rescan all channels.
Autoscan will take up to 20 minutes to
complete.
Select the destination of "ANT.IN" jack.
Back
Antenna
Cable
Antenna
Cable
Or
ANT.IN
• When aerial antenna is connected, select “Antenna”.
• When connected to CATV, select “Cable”.
• “Autoscan” will begin.
Now the system is scanning for Channels,please wait
Autoscan will take up to 20 minutes to complete.
Exit
SETUP
75%
Analog channels
10ch
Digital channels
6ch
• When the scanning and memorizing are completed,
the lowest memorized channel will be displayed.
Note:
• After setting “Autoscan”, using
[CH
K
/
L
]
on the remote
control skips unavailable programs automatically.
• If you connect the cable system directly, contact the CATV
installer.
• If you press
[POWER]
or
[SETUP]
during autoscan, the
setting will be canceled.
• Even if “Autoscan“ is completed, the channel setting will be
lost if the AC power cord is unplugged before turning off
the unit by pressing
[POWER]
.
• The PIN Code will be required once you set a PIN Code in
the “Child Lock”. Refer to page 28.
• If you want to change your PIN Code, follow the instruction
of “New Password” . Refer to page 31.
Summary of Contents for LD195SSX
Page 57: ...English Español Français ...
Page 112: ...Français ...
Page 166: ......
Page 167: ......
